DML FAQ : Transmission and Gears
: Procedure for shifting into 4LO (Through 1999 trucks)
Procedure for shifting into 4LO (Through 1999 trucks)
- Come to a dead stop.
- Put the tranny in N.
- I usually start with the transfer case in 4HI.
- In one smooth, firm motion, pull:
- To the right
- To the left when you hit the rear limit
- If you stop or slow down during this, you'll be left in t-case Neutral and will need to go back to 4HI and start all over again.
Contributed by: Andy Levy
Last updated: Wed Oct 15 21:34:15 2003