DML FAQ : Engine
: Where and how should I relocate the IAT sensor?
Where and how should I relocate the IAT sensor?
- The IAT Sensor is on the #2 intake runner (big brass thingy with two wires coming from a greyish connector)
- No teflon tape required. You can silicone it in there if you want but a 1/2" hole is all you need to drill and just screw it it.
- Plug the manifold hold with a 1/4" NPT pipe plug from Home Depot.
Contributed by: Bernd Ratsch
Last updated: Sun Dec 16 19:36:07 2001